NSB-xxx | NSV-xxx | NSP-xxx | NSE-xxx Enclosures    IP-Surveillance    www.nsgate.com
NSGate. Be Sure.


Solutions and Applications
Outdoor access Nodes NSBox
Enclosures NSB-xxx
Accessories NSBon-xx
PoE Industrial Switches
PoE Injectors
PoE Extenders
Industrial SFP modules
Din-Rail Power Supplies


Ethernet over PDH/SDH
Ethernet over xDSL
Our new products

Explosion-proof enclosures
NSBox-4042E  Explosion-proof

PoE Extender NRP-172PRi
NRP-172PRi Extender | The best

NSBox Heating
NSBox Heating  for enclosure
Basic Kits of enclosures Brief
NSB-xxx | NSV-xxx | NSP-xxx | NSE-xxx Outdoor Video Surveillance systems

Basic Kits of NSB-xxx enclosures

 NSGate mounting enclosures are designed to install outdoor video surveillance systems and full protection communication equipment against both harsh environments and acts of vandalism. Inside the enclosures are mounting plate with DIN rails for installation industrial equipment, power supplies or uninterruptible power supply. Depending on the field of application and operating conditions, various series of enclosures are offered:
 - NSB-xxx: Powder-coated sheet Steel, protection category IP66 / NEMA4;
 - NSV-xxx: Stainless Steel (AISI 304), protection category IP66 / NEMA4;
 - NSP-xxx: Glass Reinforced Polyester, protection category IP66 / NEMA4;
 - NSE-xxx: Coated Aluminum alloy, degree of protection IP67;
NSE-xxx series enclosures are made in explosion-proof design. The NSBox access Nodes assembled in such enclosures can be used for outdoor and indoor installation in hazardous areas.

 NSB/NSV-xxx series enclosures have five basic sizes (other sizes on request):
600x600x210, 380x600x210, 380x380x210, 300x400x210, 300x300x210 mm.
NSP-xxx series polyester enclosures have two basic sizes: 400x600x230, 400x400x200 mm.
NSE-xxx series explosion-proof enclosures also have various sizes, which are selected at the pre-order stage.

All mounting enclosures of any series have preset kits of options (Sets): [1], [1, 2], [1, 3], [1, 2, 3], [1, 4, 5], where the digits denote the subsystems that were installed in the enclosure during assembling:
[1]  BASIC: DIN Rails; Cable glands PG-7/9/...; Circuit breaker 10A; Terminal blocks; Fan with thermostat
[2]  HEATING: Fan Heater 75W 220 or 115VAC; Thermostats NC/NO; H1= Heating
[3]  FIBER: ODF with 4 FC, 8 FC or 16 LC adapters, pigtails, patch cords. F1= 4 FC / F2= 8 FC / F4=16 LC
[4]  IZOLUX: Thermal insulation of foamed polyethylene. H2= thermal insulation; H3= H1 + H2
[5]  COOLING: Thermoelectric Cooler. C1= TC-100-DC, C2= TC-100-AC, C3= FR-208-C, C4= FR-208-AC

In the name of any enclosure model there is an indication of the size and the presence of these subsystems:
 H1 - with the preset Fan Heater [2]
 H2 - with the preset Thermal insulation [4]
 H3 - with the preset Fan Heater [2] and Thermal insulation [4]
 F1 - with the preset ODF 4x FC [3]
 F2 - with the preset ODF 8x FC [3]
 C1-C4 - with the preset Cooling system [5]

Basic kits of enclosures NSB/NSP/NSE

Basic Kits of NSB-xxxx | Sheet steel Enclosure | IP66
NSB-3030Cabinet 300x300x210, set [1], without Heating, without ODF, with Fan
NSB-3030F1Cabinet 300x300x210, set [1, 3], without Heating, with ODF, with Fan
NSB-3030H1Cabinet 300x300x210, set [1, 2], with Heating, without ODF
NSB-3030H1F1Cabinet 300x300x210, set [1, 2, 3], with Heating, with ODF
NSB-3040Cabinet 300x400x210, set [1], without Heating, without ODF, with Fan
NSB-3040F1Cabinet 300x400x210, set [1, 3], without Heating, with ODF, with Fan
NSB-3040H1Cabinet 300x400x210, set [1, 2], with Heating, without ODF
NSB-3040H1F1Cabinet 300x400x210, set [1, 2, 3], with Heating, with ODF
NSB-3838Cabinet 380x380x210, set [1], without Heating, without ODF, with Fan
NSB-3838F1Cabinet 380x380x210, set [1, 3], without Heating, with ODF, with Fan
NSB-3838H1Cabinet 380x380x210, set [1, 2], with Heating, without ODF
NSB-3838H1F1Cabinet 380x380x210, set [1, 2, 3], with Heating, with ODF
NSB-3860Cabinet 380x600x210, set [1], without Heating, without ODF, with Fan
NSB-3860F1Cabinet 380x600x210, set [1, 3], without Heating, with Fan, with ODF/ 4FC
NSB-3860F2Cabinet 380x600x210, set [1, 3], without Heating, with Fan, with ODF/ 8FC
NSB-3860H1Cabinet 380x600x210, set [1, 2], with Heating, without ODF
NSB-3860H1F1Cabinet 380x600x210, set [1, 2, 3], with Heating, with ODF
NSB-3860H3F1Cabinet 380x600x210, set [1, 2, 3, 4], with Heating, with ODF
NSB-6060Cabinet 600x600x210, set [1], without Heating, without ODF, with Fan
NSB-6060F1Cabinet 600x600x210, set [1, 3], without Heating, with ODF, with Fan
NSB-6060H1Cabinet 600x600x210, set [1, 2], with Heating, without ODF
NSB-6060H1F1Cabinet 600x600x210, set [1, 2, 3], with Heating, with ODF
Basic Kits of NSP-xxxx | Glass Reinforced Polyester Enclosure | IP66
NSP-4060Cabinet 400x600x230, set [1], without Heating, without ODF, with Fan
NSP-4060F1Cabinet 400x600x230, set [1, 3], without Heating, with Fan, with ODF/ 4FC
NSP-4060F2Cabinet 400x600x230, set [1, 3], without Heating, with Fan, with ODF/ 8FC
NSP-4060H1Cabinet 400x600x230, set [1, 2], with Heating, without ODF
NSP-4060H1F1Cabinet 400x600x230, set [1, 2, 3], with Heating, with ODF
NSP-4040Cabinet 400x400x200, set [1], without Heating, without ODF, with Fan
NSP-4040F1Cabinet 400x400x200, set [1, 3], without Heating, with Fan, with ODF
NSP-4040H1Cabinet 400x400x200, set [1, 2], with Heating, without ODF
NSP-4040H1F1Cabinet 400x400x200, set [1, 2, 3], with Heating, with ODF
Basic Kits of NSB-xxxx with installed Thermoelectric Cooler
NSB-3838C1Cabinet 380x380x210, set [1, 4, 5], with Cooler TC-100-DC: Cover_DC_S0_100W
NSB-3838C2Cabinet 380x380x210, set [1, 4, 5], with Cooler TC-100-AC: Cover_AC_S0_100W
NSB-3860C3Cabinet 380x600x210, set [1, 4, 5], with Cooler FR-208-C: Standard_DC_S2_200W
NSB-3860C4Cabinet 380x600x210, set [1, 4, 5], with Cooler FR-208-AC: Standard_AC_S2_200W
set [1]BASIC: DIN Rails; Cable glands PG-7/9/...; Circuit breaker 10A; Terminal blocks; Fan with thermostat
set [2]HEATING: Fan Heater 75W 220 or 115VAC; Thermostats NC/NO; H1= Heating
set [3]FIBER: ODF with 4 FC, 8 FC or 16 LC adapters, pigtails, patch cords. F1= 4 FC / F2= 8 FC / F4=16 LC
set [4]IZOLUX: Thermal insulation of foamed polyethylene. H2= thermal insulation; H3= H1 + H2
set [5]COOLING: Thermoelectric Cooler. C1= TC-100-DC, C2= TC-100-AC, C3= FR-208-C, C4= FR-208-AC